Home > High Temperature EDI Module >

Continuous Electrodeionization High Temperature EDI Module For Condensate Polishing Treatment

Product Categories

Hot Water Sanitizable EDI Module [4]
High Temperature EDI Module [4]
Ultrapure Water EDI Module [4]
Dedicated EDI Module [4]
Laboratory EDI Module [1]
Low Flow Rate Module [1]
Large Flow Rate Module [1]
UPW Integrated System [1]
High Purified EDI Module [1]

Aquacells Membrane Technologies Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Continuous Electrodeionization High Temperature EDI Module For Condensate Polishing Treatment

Name: Continuous Electrodeionization High Temperature EDI Module For Condensate Polishing Treatment
Brand: Aquacells
Price: 1 USD

Connection type : 1/4 inch NPT

Electrical consumption : 50 W

Operating temperature range : Up to 85 °C

Weight : 2.5 kg

Dimensions : 300 x 150 x 100 mm

Material : High-grade polymer and stainless steel

Application : High temperature water purification

Flow rate : 0.5 to 5 L/min

Conductivity range : 0.1 to 18 MΩ·cm

Membrane type : Ion-exchange membranes

Maintenance interval : Every 12 months

Power supply : 24 V DC

Brand Name : Aquacells

Model Number : EIMD-50CP

PH range : 2 to 11

Place of Origin : China

Product name : High Temperature EDI Module

Maximum pressure : 6 bar

Certification : FDA，EU，CE，RoHS，REACH

Contact Now

EIMD-50CP Condensate Polishing Module with 16 MΩ·cm Resistivity Using Continuous Electrodeionization for 90-95% Recovery

EIMD-CP Modules

The Aquacells EIMD-CP module is developed to replace mixed bed technology for condensate polishing treatment. The module utilizes continuous electrodeionization (EDI) technology to produce water with a resistivity exceeding 16 MΩ·cm without the need for shutdown and regeneration.

Feed Water Specifications

Feed Water Source	Condensate water
Temperature	60-65 ℃ (140-149 ℉)
Feed pressure	1.4-7 bar (20-100 psi)
Fe	<0.01 ppm
pH	4-11
Oil	<0.2 ppm

Typical Module Performance

Typical Recovery	90-95%
Maximum Feed Pressure	7 bar (100 psi)
Maximum Feed Temperature	65 ℃ (149 ℉)
DC Voltage*	0-300 V
DC Amperage	0-6 A
Product Resistivity	>16 MΩ·cm

*Voltage required depends on module size

*The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.

Product Tags:

Continuous High Temperature EDI Module

Electrodeionization High Temperature EDI Module

Continuous Electrodeionization High Temperature EDI Module For Condensate Polishing Treatment Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Aquacells Membrane Technologies Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!